HOME
ABOUT
DRILLING
SAFETY
NEWS
CAREERS
CONTACT

EXPERT RIG STAFF



Our rig staff consists of a highly qualified and experienced Operation Managers, Rig Managers, and team consisting of a driller, Derrick hands, Floor hands and Fifth Man. All members of our rig team are trained and commited to the highest safety standards in the oil and gas industry.



Rig # Service Mast Mast Capacity (lbs) Drawworks Manufacturer & Model Drawworks HP Depth (ft)
103 Construction Telescoping Kelly Bar 18,000 Watson EX40 128 32
114 Construction Telescoping Kelly Bar 30,000 SoilMec SR-30 205 155
118 Construction Telescoping Kelly Bar 41,000 CZM EK-125 161 120
108 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
111 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
123 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
124 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
125 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
126 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
127 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
129 Drilling Telemast 200,000 Schramm TXD 200 760 10,000
131 Drilling Single 500,000 Rig Tech RT-400B 1,000 12,000
138 Drilling Single 500,000 Rig Tech RT-400B 1,000 12,000
139 Drilling Single 500,000 Rig Tech RT-400B 1,000 12,000

 

3 MD Cowan Super Singles

  • 500,000lbs hookload rating
  • Drilling depths of more than 12,000 with 5” full hole drill pipe
  • Capable of running double ram and annular BOPs
  • Automated pipe handling system
  • Automated drilling system with all new equipment
  • Small footprint
  • Top drive
  • Integrate skidding package

6 Schramm TXDs

  • 200,000lbs hookload rating
  • Drilling depths of more than 10,000 with 4” full hole drill pipe
  • Capable of running double ram and annular BOPs
  • Load safe pipe handling system
  • Automated drilling system with all new equipment
  • Small footprint
  • Top drive
  • No cranes required for moving
  • Complete air packages utilizing compressor

Soilmec SR-30

  • Hole sizes from 18” to 96” hole diameter
  • Max depth of 155’
  • Max torque of 95,000 lbf-ft
  • Max push force of 23,000lbs
  • Max pull force of 28,000lbs
  • Mast height of 60’

CZM EK-125

  • Hole sizes from 18” to 96” hole diameter
  • Max depth of 120’
  • Max torque of 88,000 lbf-ft
  • Max push force of 43,000lbs
  • Max pull force of 53,000lbs
  • Mast height of 52’

Watson EX40

  • Hole Sizes from 18”-72” hole diameter
  • Max depth of 79 ft
  • Max torque of 50,000 lbf-ft
  • Max push forces of 2838 lbs
  • Max pull forces of 18,000 lbs
  • Mast Height of 10’ 5”

Get in touch with Falcon Drilling. Fill out our Contact Form.